Finisher/Booklet Finisher
Paper ejection jogger mechanism
The finisher is equipped with the paper jogger arm to align the edge of paper at the upper part of the
paper exit.
Just before the paper is delivered to the finisher shift tray, the paper jogger arm lowers and performs the
action (opening and closing) to align the edge of paper.
The paper ejection jogger mechanism operates as follows.
• If the jogger operation is ON: The paper jogger arm moves up and down repeatedly to align the
edge of paper in accordance with the number of copies in the finisher shift tray. After the last copy
is delivered, the paper jogger arm returns to its home position and will be on standby.
• If the jogger operation is OFF: The paper jogger arm stays on standby in the home position.
1. Paper jogger arm
A. If the jogger operation is ON
B. If the jogger operation is OFF
In 1361 [Finisher: Output], you can switch the jogger operation ON/OFF in accordance with the type
of paper, such as envelopes or other types of paper that are difficult to align when delivered.
2. Printing Process
28
To Next Page
Loading...
