When to use
If paper misfeeds persist even after setting the assist mode to On, enter the measured paper
thickness (in units of µm). If the entered paper thickness is not appropriate, paper misfeeds or
double-feeding paper jams may occur.
Related Troubleshooting
• Double Feeding
• Paper Misfeeds
For detailed procedure, see the Troubleshooting manual.
Tray Elevation Assist(Speed)
1303 [Main/2-Tray LCIT: Other Setting] [Tray Elevation Assist] [Speed]
Function
Specify the speed to raise the bottom plate when the assist mode in [Tray Elevation Assist] is set to
On.
When to use
If paper misfeeds persist even after setting the assist mode to On, set this to [Faster] or [Fastest]. If
the specified value is not appropriate, paper misfeeds or double-feeding paper jams may occur.
Related Troubleshooting
• Double Feeding
• Paper Misfeeds
For detailed procedure, see the Troubleshooting manual.
Bypass Tray
1312 [Bypass Tray]
Function
Sets pickup assist On or Off. If the Pickup Assist setting is set to ON, the pickup roller will assist
paper delivery.
When to use
Effective for jams, double-feeds and non-feeds.
Pickup assist is effective for non-feeds that occur with thick media that have low friction. Note that
double-feeds may occur with coated stocks, if the effect of the pickup assist is too strong.
Paper Feed/Delivery
49
To Next Page
Loading...
