The web is soaked with silicone oil, which is supplied to the pressure roller and the fusing belt in very
small amounts.
The interval between each cleaning operation can be adjusted in four levels.
1. Pressure roller
2. Cleaning web
Related Advanced Settings
page 39 "Fusing Cleaning"
Fusing Belt Smoothing Roller
Printing continuously on a particular paper size causes the paper edges to nick the fusing belt, and when
switched to a job printed on a larger size, the nicked fusing belt produces unwanted gloss streaks on the
prints.
Also, continuous printing of high image coverage pages causes the wax contained in toner to gradually
adhere to the fusing belt, affecting the gloss consistency of the prints.
1. Paper edge
2. Fusing belt
Fusing
17
To Next Page
Loading...
