For detailed procedure, see the Troubleshooting manual.
Image Transfer Output Correction
1215 [Image Transfer Output Correction]
Function
Corrects the amount of transfer current applied to the photoconductor unit-to-belt transfer process.
When to use
If white spots appear, decrease this value.
If the leading edge shows density problems or scattered toner or streaks appearing across the feed
direction, increase this value.
If toner is scattered close to the trailing edge, increase this value.
If the job is printed in FC and black appears low in density, increase this value.
Related Troubleshooting
• Horizontal Streaks
• Excessive Density
• Low Image Density
• White Spots
• Toner Scattering
• Stains
• Faint
For detailed procedure, see the Troubleshooting manual.
Paper Transfer
Paper Transfer Output
1214 [Paper Transfer Output]
Function
Adjusts the amount of bias applied for the intermediate transfer belt-to-paper transfer process.
When to use
Problems, which are prone to occur in a low temperature and humidity environment, such as white
spots, toner blasting and mottling on solid-fills, may be solved by adjusting this setting.
Related Troubleshooting
• Horizontal Streaks
Image Quality
35
To Next Page
Loading...
