• White Spots
• Creases / Wavy Streaks
For detailed procedure, see the Troubleshooting manual.
Fusing Pressure Roller On Before Fusing
1242 [Fusing Pressure Roller On Before Fusing]
Function
The pressure roller comes into contact with the fusing belt before the job starts, so that the pressure
roller is well heated in advance. With the pressure roller heated, toner particles that adhere to the
pressure roller during the job will melt and become more easily removable by the cleaning web.
When to use
Small black spots, images affected by toner adhesion to the pressure roller separation plate
Related Troubleshooting
• Black Spots
For detailed procedure, see the Troubleshooting manual.
Fusing Cleaning
1243 [Fusing Cleaning]
Function
Specifies the interval of the web cleaning operation and the behavior of the pressure roller when it
separates from the fusing belt.
When to use
Problems such as granular toner clotting (black spots) may be solved by shortening the interval
between each cleaning operation.
Related Troubleshooting
• Black Spots
For detailed procedure, see the Troubleshooting manual.
Margin
1244 [Margin]
Function
Adjusts the width of the margins at the leading and trailing edges.
Image Quality
39
To Next Page
Loading...
