• Development …… The development roller [2] carries toner to the latent image on the
Photoconductor unit [1].
• Image transfer
• Photoconductor unit-to-belt transfer …… Toner images created on each Photoconductor unit [1] are
transferred sequentially to the intermediate transfer belt [5].
• Belt-to-paper transfer …… Toner image on the intermediate transfer belt [5] is transferred onto the
paper when the paper passes through the Paper Transfer [7].
• Fusing …… The Fuser Unit [6] applies heat and pressure to fuse the toner image onto the paper.
2. Printing Process
6
To Next Page
Loading...
