• [DFE Console] hub
Press [ DFE Console] to connect to the DFE that is connected to the network remotely.
"Connecting to the Fiery Controller Remotely from the Control Panel"
• [Fiery Settings] hub
The [Fiery Settings] hub displays the setting items of the Fiery controller that is connected to the machine.
On the hub, the frequently used print settings appear directly, allowing you to change the settings of a
job without having you connect remotely to the DFE.
"Using the [Fiery Settings] Hub"
• [Settings] hub
Press [ ] on the navigation bar to display the [Settings] hub.
You can configure the items on the control panel, specify the machine behavior, create, or edit the timer,
configure the network, and specify other system-wide settings of the machine.
5. Main power indicator
The main power indicator lights up when you turn on the main power switch.
If the indicator keeps flashing even after you turn the power off, do not remove the power plug from the
receptacle.
Intuitive Screen Operation Using Fingertips
On each screen of the control panel, you can perform the following operation by touching the screen
with your fingertips.
Flick (Scrolling the Screen)
Flick the screen up or down to scroll through the screens.
Confirming the Counter
You can check the number of sheets used in printing.
Press [ ] [Printer Settings] [Counter] to display the counter screen.
1. Notes on What to do Before Using the Machine
8
To Next Page
Loading...
