Replenishing the Staples
A message appears when a consumable needs to be replaced soon. Prepare a replacement, and
replace the consumable as required.
For the procedure to replace the staples, press [Replacement Procedure] on the message screen, and
follow the instruction that is displayed on the screen.
1. Confirm the message.
"Staples are almost out."
The staples are almost depleted. Prepare the replenishment staples.
"Out of staples."
Staples need to be replenished. Wait until the printing operation stops, and then replenish the
staples.
Staples cannot be replenished until completely depleted.
2. Open the cover of the finisher, and replenish the staples.
Press [Replacement Procedure] to view the details of the replacement procedure.
On the machine, you can use three types of staples for two types of finishers. The figure below
shows the types of staples (T and X) that can be used on each type of finisher.
1. Booklet Finisher
2. Finisher
Replenishing the Staples
57
To Next Page
Loading...
