2. Loading Paper
Fanning the Paper
• If you load coated paper, label paper, transparencies, or thick paper of 150.1–470.0 g/m
2
(55.1 lb. Cover–172 lb. Cover), it is important that you fan the sheets thoroughly. Misfeeds may
occur if paper is not fanned thoroughly. If the machine feeds several sheets of paper together or it
does not feed paper, fan paper and load it again.
1. Fan the stack of paper to load.
2. Holding its shorter ends, flex the stack back and forth to create space between the sheets.
Repeat this several times.
11
To Next Page
Loading...
