7. Backup/Restore
Creating a Backup of/Restoring the Setting
Information of the Machine
• Be sure to create a backup of your important data. The hard disk drive of the color controller may
be erased or replaced when the controller needs to be repaired.
• We are not responsible for any loss of data that occurs as a result of a hardware failure.
You can create a backup of the setting information of the machine and UI server, and restore it a later
time.
When operating the control panel of the machine, you can store the backup data on a USB memory
device that is attached to the USB host interface on the control panel.
The following information can be backed up/restored.
• Machine Setting Information: Information on the settings of the machine, settings information
including the network settings, and device information including the machine ID
(counter information, information about adjustments, logs, and displayed data not included)
• UI Server Setting Information: Setting Information for Displaying Various Contents on the Control
Panel
(device specific information, logs, and displayed data not included)
• Paper Information: Paper type, thickness, and information of other paper properties, adjustment
data of the main unit of the machine, device information including the machine ID, and other
information
1. When creating a backup/restoring data on the USB memory device that is attached to the
control panel of the machine, insert the USB memory device into its USB host interface on
the control panel.
61
To Next Page
Loading...
