10. Tighten the screw on the arm holding the side fence in place.
11. Carefully push the paper tray fully in until it clicks.
• Various sizes of paper can be loaded in the wide LCT by adjusting the positions of fences.
• When you are changing the paper size, see "Changing Tray Paper Settings".
• You can load envelopes in the wide LCT. When loading envelopes, place them in the correct
orientation. For details, see below.
• "Envelope Orientation and Recommended Status"
• When you are using a special printing feature such as banner printing, cover page, and separation
sheets, the indicator on the front side of the tray remains lit until printing is completed. You cannot
reload paper while the indicator remains lit.
Loading Paper into the Paper Tray
17
To Next Page
Loading...
