Message Causes Solutions
Fax Job Memory
Overflow
The number of fax jobs in
memory (unsent or unprinted
faxes) has reached maximum,
so new jobs cannot be stored.
Wait until pending jobs have been
transmitted or printed.
Indep.Sply.Prt.Cart. A non-supported print cartridge
is installed.
Remove and replace it with a print
cartridge specified by an authorized
dealer.
Internal Misfeed Paper has been jammed in the
machine.
Remove the jammed paper. See
page 256 "Clearing Misfeeds".
Memory Overflow The data is too large or
complex to print.
If using the printer driver, set [Resolution] in
the [Print Quality] tab to [600 × 600 dpi].
Memory Overflow • The machine's memory
reached capacity while
scanning the first page of
the original to store a fax
job in memory before
transmission.
• The machine's memory
reached capacity while
storing a fax in memory in
Memory Transmission
mode.
Resend the fax in parts as several smaller
individual faxes, or send at a lower
resolution.
Memory Overflow
TX
Cancel
Memory has reached capacity
while scanning the second or
later pages of the original when
trying to send a fax in Memory
Transmission mode.
Press [TX] to send only the pages that have
been scanned in memory, or press
[Cancel] to cancel.
Misfeed: BypassTray Paper has been jammed in the
bypass tray.
Remove the jammed paper. See
page 256 "Clearing Misfeeds".
Misfeed: Stnd. Tray Paper has been jammed in the
paper exit area.
Remove the jammed paper. See
page 256 "Clearing Misfeeds".
Misfeed: Tray 1 Paper has been jammed in the
tray 1 paper input area.
Remove the jammed paper. See
page 256 "Clearing Misfeeds".
10. Troubleshooting
250
To Next Page
Loading...
