Configuring the Printer Settings Using
Installation Settings
On the [Installation Settings] screen, specify the date and time and configure the network and other
settings using the wizard.
1. Press [Start] on the Installation Settings start screen.
2. Configure the time zone.
1. Press [OK] while the [Time Zone] menu is highlighted Enter the value
Specify the standard time in your region. The values are between -12:00 and +13:00.
2. Press [OK]
3. Configure the date and time.
1. Press [OK] while the [Date and Time] menu is highlighted Enter the date
Set the date of the printer's internal clock.
2. Press [OK]
3. Enter the time
Set the time of the printer's internal clock.
4. Press [OK]
2. Configuring the Initial Settings of the Printer
12
To Next Page
Loading...
