Test Printing
After configuring installation settings, print the configuration page to confirm the settings.
• The configuration page is printed on A4 or Letter (8
1
/
2
" × 11") size paper. If no A4 or Letter paper
is loaded in the paper trays, the configuration page is printed on the paper fed from the tray with
priority.
Press the [Menu] key, and then select the setting items using the [ ] or [ ] key.
1. Select [List/Test Print] Press [OK]
2. Select [Config. Page] Press [OK]
• If the test print cannot be completed, see Quick Installation Guide, and check if the printer is
correctly configured. A test print is performed regardless of the setting in Installation Settings.
2. Configuring the Initial Settings of the Printer
18
To Next Page
Loading...
