3. Installing the Driver
This chapter explains the software included in the supplied CD-ROM.
Start Installer
To connect this printer to a client computer and print documents, install the software included in the
provided CD-ROM to the client computer.
The installer starts automatically when you insert the supplied CD-ROM into the CD-ROM drive of a
client computer running under Windows or Windows Server. You can then install the printer driver
included in the CD-ROM.
The contents (display items) of the installer are as follows:
Install from Disk
The screen for selecting [Network Printer(s)] or [USB printer(s)] appears.
While installing the PCL 6 printer driver, also configure the connection settings appropriate for the
selected connection type.
For details, see page 24 "Quick Installation via a Network" or page 24 "Quick Installation via
a USB Connection".
Install Online
Installs the Device Software Manager.
Use Driver Installer in the Device Software Manager to download and install the latest version of
the PCL 6 printer driver that supports the device and the operating system you are using.
For details, see page 39 "Installing the Device Software Manager".
PCL Printer Drivers
Installs the PCL 6 and/or PCL 5c printer drivers.
For details about installing drivers, see .page 26 "Installing the Printer Driver for a Network
Connection" or page 33 "Installing the Printer Driver for a Local Connection".
PostScript 3 Printer Driver
Install the PostScript 3 printer driver.
For details about installing the driver, see page 26 "Installing the Printer Driver for a Network
Connection" or page 33 "Installing the Printer Driver for a Local Connection".
Setup Guide
This guide is for initial settings for the printer and installing the driver to your computer.
Select Language
Change the interface language.
19