Ricoh SP C360DNW - 1 Before Using the Printer; Setting up Operations

1. Before Using the Printer
This manual describes the settings required to prepare the printer for use, and the procedure for
installing the driver.
Setting Up Operations
Operation target Things to do
The printer that is turned on for the first time
DUP360
Installation Settings starts when the printer is
turned on for the first time. Proceed with the
wizard to configure the printer for use. The
settings you can configure in Installation Settings
are as follows:
• Time Zone
• Date and Time
• Daylight Saving Time
• Network
For details, see page 7 "Configuring the Initial
Settings of the Printer".
Your computer that is connected to the same
network as the printer
DUP368
Use the CD-ROM provided with the printer to
install the driver to your computer.
For details, see page 19 "Installing the Driver".
• You can also download the driver from the manufacturer's website and install it to your computer.
For details, see the manufacturer's website.
3