1. On the [Start] menu, select [Devices and Printers].
2. Right-click the printer's icon, and then click [Printer properties].
3. Click the [Accessories] tab.
If options in the [Accessories] tab are disabled, bidirectional connection is enabled. In this case, no
change is necessary for option settings.
4. Select options installed from the [Options] area, and then configure the necessary
settings.
5. Click [Change Input Tray Settings...].
6. In [Input Tray:], specify which trays to use. Following this, in [Paper Size:], specify the size
of the paper that you want to load in each tray.
Click [Modify Input Tray/Paper Size] to apply the setting for each tray.
7. Click [OK].
8. Click [OK] to close the printer's properties window.
• For details about making option settings for the printer using an OS X and macOS, see page 38
"Configuring Option Settings for the Printer Under OS X and macOS".
Configuring Option Settings for the Printer
45
To Next Page
Loading...
