1. Press the [Menu] key.
2. Press the [ ] or [ ] key to select [Paper Input], and then press the [OK] key.
3. Press the [ ] or [ ] key to select [Paper Size: (tray name)], and then press the [OK] key.
4. Select the paper size you want to set using the scroll keys, and then press the [OK] key.
About two seconds later, the display returns to the [Paper Input] screen.
5. Press the [Menu] key.
The display returns to the initial screen. This completes the paper size setting.
Specifying custom size paper for Tray 1 and the optional paper feed unit
• When printing on custom size paper, specify the paper size using the control panel and printer driver.
• The following is the range of paper sizes that can be loaded in each type of the paper trays:
• Tray 1: 139.7 - 216 mm (5.5 - 8.5 in.) in width and 139.7 - 356 mm (5.5 - 14.01 in.) in length.
Loading Paper
105
To Next Page
Loading...
