Turning the Printer's Power On and Off
This section explains the procedures for turning the printer's power on and off.
• It is dangerous to handle the plug with wet hands. Doing this may result in receiving an electric shock.
• Do not turn off the main power switch before following the shutdown procedure shown here. Doing
so can result in damage to the hard disk or memory, leading to malfunction.
• Do not physically disturb the printer while printing is in progress. Doing so may damage the printer.
Turning on the Power
Use this procedure to turn on the printer's power.
1. Turn the printer's power switch to On.
When the printer has fully warmed up, a ready message appears on the display and you can begin
printing.
Turning off the Power
Use this procedure to turn off the printer's power.
Turning the Printer's Power On and Off
21
To Next Page
Loading...
