You can select custom paper type settings made using Web Image Monitor.
• Be sure to select the paper type when you load thick paper, envelopes, or OHP transparencies in the
Bypass Tray.
• The paper type selected using the printer driver overrides that selected using the control panel.
• Be sure to set a paper type using the control panel of the printer as the following procedure. If you
set a paper type only by the printer driver, printing result might not be appropriate.
1. Press the [Menu] key.
2. Press the [ ] or [ ] key to select [Paper Input], and then press the [OK] key.
3. Press the [ ] or [ ] key to select [Paper Type: Bypass Tray], and then press the [OK] key.
4. Press the [ ] or [ ] key to select the paper type that is loaded, and then press the [OK]
key.
About two seconds later, the display returns to the [Paper Input] screen.
5. Paper and Other Media
114
To Next Page
Loading...
