Ricoh SP6330 - Page 118

3. Set the envelope size and feed direction. Press the [Menu] key.
BVP006
4. Press the [ ] or [ ] key to select [Paper Input], and then press the [OK] key.
5. Press the [ ] or [ ] key to select [Paper Size: Bypass Tray], and then press the [OK] key.
6. Select the envelope type using the scroll keys, and then press the [OK] key.
7. Press the [Menu] key.
The display returns to the initial screen.
• Confirm that the top of the stack is not higher than the limit mark on the side guides.
• Do not push the stack of envelopes with too much force.
• Confirm that the edges of envelopes fit under the side guides.
• p.88 "Types of Paper and Other Media"
5. Paper and Other Media
116
5