EasyManua.ls Logo

Ricoh SP6330 - Page 130

Ricoh SP6330
228 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Avoid getting toner on your clothes or skin when removing a paper jam or replacing toner. If your
skin comes into contact with toner, wash the affected area thoroughly with soap and water.
If toner gets on your clothing, wash with cold water. Hot water will set the toner into the fabric and
may make removing the stain impossible.
Do not expose the toner cartridge to light for a long time. Do not leave the front cover open for a long
time. If the toner cartridge is exposed to a light for a long time, the toner cartridge might get damaged
and print quality might be reduced. Replace the toner cartridge immediately.
The toner cartridge packaged with the printer can print up to 6,000 pages when it is compliant with
ISO/IEC 19752 and the image density is set as the factory default. ISO/IEC 19752 is an international
standard on measurement of printable pages, set by the International Organization for
Standardization.
When handling toner cartridges, never stand them up on either end or position them upside down.
Store toner cartridges in a cool dark place.
Do not use chemical cleaner or organic solvent such as thinner or benzine.
Actual printable numbers vary depending on image volume and density, number of pages printed at
a time, paper type and size, and environmental conditions such as temperature and humidity. Toner
quality degrades over time. You may have to replace the toner cartridge prematurely. We recommend
you prepare a new toner cartridge beforehand.
The new toner cartridge can print up to 20,000 pages.
The life span of pages the toner cartridge can print vary depending on the depletion of toner and the
cartridge parts. The actual number of pages you can print from a particular toner cartridge depends
on the paper type, size, orientation, the contents of your print images, number of printout from a print
job, and printing environment conditions. Toner cartridges may need to be changed sooner than
indicated above due to deterioration over the period of use.
If the following problems occur even with toner still remaining, the fusing part of the toner cartridge
is deteriorated over the period of use. Prepare a new toner cartridge.
Areas of printout are missing.
The print out image is missing or partially blurred.
White streaks appear.
The whole printout is blemished.
Images are blurred.
When to replace the toner cartridge
The toner cartridges for this machine are integral components that contain toner, a photoconductor
unit, and a waste toner bottle.
6. Replacing Consumables and Maintenance Kit
128
6

Table of Contents

Related product manuals