• When lifting the printer, use the inset grips on both sides. Otherwise the printer could break or
cause injury if dropped.
• When lifting the paper feed unit, hold the bottom of it, and then lift it slowly. Lifting it carelessly or
dropping it may cause an injury.
• Always move the printer horizontally. Turning the printer sideways or tilting it backward or forward
while moving will result in toner leakage.
• Do not put the printer on an unstable or sloped surface.
• Be sure to move the printer horizontally. Moving the printer up and down may cause toner to scatter.
1. Lift the paper tray slightly, and then pull it out until it stops.
2. Lift the front side of the tray, and then pull it out of the printer.
Replacing the Maintenance Kit
137
To Next Page
Loading...
