7. Paper Exit Cover
Open this cover to remove jammed paper.
8. Exhaust Vent
Releases hot air from the printer's interior to prevent internal components overheating.
The direction of exhaust from this vent can be adjusted.
Do not block or obstruct the printer's vents. Doing so can result in malfunctions caused by build up of heat inside
the printer.
9. Front Cover Release Button
Press this to open the front cover.
10. Intake Vent
Draws cool air into the machine's interior to prevent internal components overheating.
To prevent dust entering the printer's interior, attach the dustproof filter to this vent.
Do not block or obstruct the printer's vents. Doing so can result in malfunctions caused by build up of heat inside
the printer. See p.148 "Replacing the Dustproof Filter".
11. Power Switch
Press this to turn the printer's power on and off.
12. Friction Pad
This ensures only one sheet of paper is fed in at a time. If multi-sheet feeds occur, clean the friction pad carefully.
If the message "Replace Maintenance Kit.", replace the friction pad with a new one.
13. Paper Tray (Tray 1)
Loads up to 500 sheets of plain paper (75 g/m
2
, 20 lb.) into this tray for printing.
The paper tray is identified as "Tray 1" on the display.
1. Guide to the Printer
14
To Next Page
Loading...
