Ricoh SP6330 - Page 195

1. Press the [Menu] key.
BVP006
2. Press the [ ] or [ ] key to select [Maintenance], and then press the [OK] key.
3. Press the [ ] or [ ] key to select [General Settings], and then press the [OK] key.
4. Press the [ ] or [ ] key to select [Envelope Lever Alert], and then press the [OK] key.
5. Press the [ ] or [ ] key to select [Display] or [Do not Display], and then press the [OK]
key.
About two seconds later, the display returns to the [Maintenance] menu.
6. Press the [Menu] key.
The display returns to the initial screen.
Using the Envelope Lever
193
9