2. Lift the front side of the tray, and then pull it out of the printer.
3. Pinch the green clips on the side guide and the end guide, and then adjust the guides to the
paper size being loaded.
4. Slide the two green switches into one of the two positions according to the thickness of the
paper you are loading. If the paper is 157 g/m
2
(42 lb.) or thicker, slide both switches into
the rear (thick) position. If the paper is lighter than 157 g/m
2
(42 lb.), slide both switches
into the forward (thin) position.
Make sure that the positions of both switches are the same.
Loading Paper
97
To Next Page
Loading...
