EasyManua.ls Logo

rigert PEGASUS-NOVA-mps2 User Manual

rigert PEGASUS-NOVA-mps2
22 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
PEGASUS-NOVA mps 2
FAULT FINDING GUIDE
STAIRLIFT
Question and Answer IconNeed help?

Do you have a question about the rigert PEGASUS-NOVA-mps2 and is the answer not in the manual?

rigert PEGASUS-NOVA-mps2 Specifications

General IconGeneral
Speed0.15 m/s
Safety beltYes
Battery backupYes
Safety FeaturesSafety sensors
Seat typeFoldable
Seat width45 cm
Seat depth40 cm
Armrest typeFixed
Footrest typeFolding

Summary

Foreword

Fault Finding Guide

Mains Connection, Fuses, and Frequency Controller

Check main supply, fuses, frequency controller, and travel recognition PCB.

Frequency Converter (FC) Fault Remedy

Troubleshoot faults on the Frequency Converter (FC).

Travel Recognition PCB Check

Inspect and test the travel recognition PCB for proper function.

Adjustments

Setup Check and Parameter Reprogramming

Verify and reprogram 'setup' parameters against specification sheets.

Carriage PCB Adjustments

Check and understand dip-switch settings on the carriage PCB.

Communication

Communication Status and Fault Diagnosis

Check communication status using 'Modem Status' and diagnose faults.

Call Station Communication Troubleshooting

Troubleshoot communication issues with individual call stations.

Safety Circuit Checks

Safety Circuit I and II Continuity Testing

Test continuity for safety circuits I and II, checking all relevant switches.

Call Station Status

Checking and Interpreting Call Station Status (RS)

Check and interpret the operational status of call stations (RS) via display.

Carriage Status and Faults

Carriage Status Testing

Test carriage status: drive orders, safety switches, and landing recognition.

Carriage Switch Fault Finding

Search for faults related to safety and position switches on the carriage.

Rail and Rope System

Rail/Rope Continuity and Short Circuit Checks

Check continuity and diagnose short circuits in the rail and rope system.

Drive Wheel Inspection

Inspect the drive wheel for proper function.

Bridge Rope/Rail Connection

Bridge the rope/rail connection to diagnose faults.

Final Remarks