rigert PEGASUS-NOVA-mps2 - Default Chapter; Table of Contents

rigert Ltd., Stairlifts
Operating manual
Nr.: AW4231
CH-6405 Immensee
Fault finding PEGASUS-NOVA-mps2
Date: 13.03.06
Page: 2/22
Contents
1 Foreword .........................................................................................................................4
2 Fault finding guide..........................................................................................................6
2.1 Mains connection, Fuses, Frequency controller and travel recognition PCB............... 6
2.1.1 Check main supply on main control box ....................................................................... 6
2.1.2 Check fuses ......................................................................................................................7
2.1.3 Fuse blown or loose.........................................................................................................7
2.2 Check frequency converter (FC) (if applicable).................................................................8
2.2.1 Fault remedy on FC.......................................................................................................... 8
2.3 Check the travel recognition PCB ...................................................................................... 8
3 Adjustments....................................................................................................................9
3.1 Check setup.......................................................................................................................... 9
3.1.1 Reprogram “setup” parameters...................................................................................... 9
3.2 Check adjustments on carriage PCB ............................................................................... 10
3.2.1 Explanation of the possible adjustments ....................................................................10
4 Communication.............................................................................................................11
4.1 Check communication ....................................................................................................... 11
4.1.1 Search faults in “Modem Status” .................................................................................11
4.1.2 Communication with call stations ................................................................................ 12
5 Check safety circuit I and II .........................................................................................13
6 Status of call stations (RS) ..........................................................................................14
6.1 Check call stations.............................................................................................................14
6.1.1 Interpretation of call station status (RS) ...................................................................... 14
7 Status of carriage (FZ).................................................................................................. 15
7.1 Test carriage status ........................................................................................................... 15
7.1.1 Check drive order from hand hold control unit on carriage....................................... 15
7.1.2 Check safety switches on carriage...............................................................................15
7.1.3 Check landing recognition of carriage......................................................................... 15
7.1.4 Check platform position of carriage............................................................................. 16
7.1.5 Explanation of display for menu FZ status.................................................................. 17
7.2 Search for faults.................................................................................................................18
7.2.1 Safety switches .............................................................................................................. 18
7.2.2 Position switches ........................................................................................................... 18
7.2.3 Switch locations on carriage......................................................................................... 19
8 Rail / Rope .....................................................................................................................21
8.1 Check for continuity rail / rope ......................................................................................... 21
8.1.1 Search for short circuit rail / rope................................................................................. 21
8.2 Check drive wheel..............................................................................................................21
8.3 Bridge rope / rail................................................................................................................. 22
9 Final remark ..................................................................................................................22
©2005 rigert Ltd., Stairlifts
All rights reserved.
No part of this document may be copied and/or published by means of print, photocopies, microfilms or any other method
without the prior written permission of the manufacturer. This also applies to the included drawings and/or diagrams and
plans.