rigert Ltd., Stairlifts
Operating manual
Nr.: AW4231
CH-6405 Immensee
Fault finding PEGASUS-NOVA-mps2
Date: 13.03.06
Page: 9/22
3 Adjustments
3.1 Check setup
Check the setup menu for correct adjustments against the specification sheet (FO3161)
Encoder
Turn encoder till the menu “Setup” Turn the encoder and check whether
appears - then press it parameters comply with the
specifications
if parameters comply, proceed to point 3.2
otherwise proceed to 3.1.1
3.1.1 Reprogram “setup” parameters
Obviously, different parameters were found. You need to investigate the reason (new
requirements of the client; technical modifications; ….) for if they have not been already
mentioned on FO3161 in the column “changes”.
Unless there are reasons, reprogram the controller acc to the specification sheet FO3161.
For programming respectively reprogramming refer to FO3161.
Parameter 13 showing up Exit parameter
Indicating 2 landings (HS) “sichern” = safe parameter
If yes: Press encoder
To Next Page
Loading...