1. Description
RigExpert AA-200/AA-500 are powerful
antenna analyzer designed for testing,
checking, tuning or repairing antennas and
antenna-feeder paths.
Graphical SWR (Standing Wave Ratio)
and impedance display is a key feature of
these analyzers which significantly
reduces time required to put an antenna to
rights.
Easy-to use measurement modes, as well
as additional features such as memory
storage and connection to a personal
computer, make RigExpert AA-200/AA-
500 attractive for professionals and
hobbyists.
The new MultiSWR™ and SWR2Air™
[AA-200 only] modes are unique for these
antenna analyzers.
The following tasks are well-accomplished
by using RigExpert AA-200/AA-500:
• Rapid check-out of an antenna
• Tuning an antenna to resonance
• Comparing characteristics of an
antenna before and after specific
event (rain, hurricane, etc.)
• Making coaxial lines or measuring
their parameters
• Cable fault location
• Measuring capacitance or
inductance of reactive loads
1. Antenna connector
2. LCD (Liquid Crystal Display)
3. Keypad
4. Charger connector (9-14V
DC)
5. Power button
6. USB connector
To Next Page
Loading...
