RigExpert AA-200 - Specifications

4
2. Specifications
Frequency range: AA-200: 0.1…200 MHz,
AA-500: 5…500 MHz
Display modes:
- SWR at single or multiple frequencies
- SWR, R, X, Z, L, C at single frequency
- SWR graph
- R, X graph
[RigExpert AA-500 displays absolute value of the reactance]
Single- and multi-frequency measurement:
- Frequency resolution: AA-200: 1 kHz
AA-500: 10 kHz
- SWR-only mode: easily-readable bar
- SWR range: 1…10
- SWR display for 50 and 75 Ohm systems
- R, X range: AA-200: 0…1000, -1000…1000 Ohm
AA-500: 0…250, 0…250 Ohm
SWR and R, X graphs:
- 100 points plot
- Sweep width: AA-200: 0.001…200 MHz
AA-500: 1…500 MHz
- Frequency resolution: AA-200: 1 kHz
AA-500: 10 kHz
- SWR range: 1…10
- SWR display for 50 and 75 Ohm systems
- R, X range: AA-200: 0…200, -200…200 Ohm
AA-500: 0…200, 0…200 Ohm
- 100 memories to store and recall graphs
- Presets for radio amateur bands
RF output:
- Connector type: AA-200: UHF (PL)
AA-500: N
- Output power: AA-200: typ. 10 dBm
AA-500: typ. 5 dBm (F<250MHz), -5 dBm (F=500 MHz)
Power:
- 4.8V, 1800 mA·h, Ni-MH accumulator
- Max. 2 hours of continuous measurement
- Max. 2 days in stand-by mode
- External 9…14V, 200 mA charger
- Full charge time: 10…12 hours
Interface:
- 128x64 graphical LCD with backlit
- 6x3 keys on the water-proof keypad
- Multilingual menus and help screens
- USB connection to the personal computer
Dimensions: 23x10x5.5 cm (9x4x2”)
Operating temperature: 0…40 °C (32…104 °F)
Weight: 650g (23 Oz)