14
0 – go to the third page of settings which contains reset commands.
AA-30 AA-54
2 – reset the entire analyzer to factory defaults;
3 – reset all 100 graph memories (AA-54 only);
0 – go to the first page of settings.
4.7. Computer connection
RigExpert antenna analyzers may be connected to a personal computer for displaying
measurement results on its screen, taking screen shots of the LCD, as well as for
updating the firmware.
A conventional USB cable may be used for this purpose. The supporting software is
located on the supplied CD or may be downloaded from the www.rigexpert.com
website. After installing programs, please see the Software Manual for details.
To Next Page
Loading...
