RigExpert AA-30 User Manual

3
1. Description
RigExpert AA-30 and AA-54 are powerful
antenna analyzers designed for testing,
checking, tuning or repairing antennas and
antenna feedlines.
Graphical SWR (Standing Wave Ratio)
and impedance display are key features of
these analyzers which significantly reduce
the time required to adjust an antenna.
Easy-to use measurement modes, as well
as additional features such as connection
to a personal computer (to plot Smith
diagrams, etc.), make RigExpert AA-30
and AA-54 attractive for professionals and
hobbyists.
The following tasks are easily
accomplished by using these analyzers:
• Rapid check-out of an antenna
• Tuning an antenna to resonance
• Comparing characteristics of an
antenna before and after specific
event (rain, hurricane, etc.)
• Making coaxial stubs or measuring
their parameters
• Cable fault location
• Measuring capacitance or
inductance of reactive loads
1. Antenna connector
2. LCD (Liquid Crystal Display)
3. Keypad
4. ok button (start/stop
measurement, enter)
5. cancel button (exit to main
menu, cancel)
6. Power on/off button
7. USB connector

RigExpert AA-30 Specifications

General

Brand	RigExpert
Model	AA-30
Category	Measuring Instruments
Language	English