Thank you for purchasing a RigExpert
AA-35 ZOOM Antenna and Cable Analyzer!
We did our best to make it powerful yet easy
to use.
The analyzer is designed for measuring SWR
(standing wave ratio), return loss, cable loss,
as well as other parameters of cable and
antenna systems in the range of 60 kHz to
35 MHz. A built-in ZOOM capability makes
graphical measurements especially effective.
The following tasks are easily accomplished
by using this analyzer:
• Rapid check-out of an antenna
• Tuning an antenna to resonance
• Comparing characteristics of an antenna
before and after specific event (rain,
hurricane, etc.)
• Making coaxial stubs or measuring their
parameters
• Measuring capacitance or inductance of
reactive loads
1. Antenna connector
2. Liquid crystal display
3. Keypad
4. USB connector
4
Introduction
1
2
3
4
To Next Page
Loading...
