RIGOL
© 2006 RIGOL Technologies, Inc
User’s Guide for DG2000 Series
2-83
(1) Press Utility to enter the utility function.
(2) Choose System Æ Setting ；
(3) Select Default to reset the instrument as its default state.
8. Synchronize multiple instruments
By using the external I/O of the generator, connect the instrument to the other
kinds of instruments, to perform the synchronous control.
9. RIGOL Technology Support
To obtain technical support, contract the local RIGOL Support Center or go to
RIGOL website:
www.rigol.com.
Consult Chapter 6 for more details.
To Next Page
Loading...
