Rigol DG2000 Series User Manual

RIGOL
© 2006 RIGOL Technologies, Inc.
User’s Guide for DG2000 Series
I
Index
AM ...........................................2-31
Appendix ....................................6-1
Common Prompt Messages ..........4-1
Conflict Settings ..........................4-6
Contact RIGOL ............................6-4
Data Overflow ........................... 4-10
DG2000 Series Accessories...........6-1
Edge Time ................................2-13
Error Messages............................4-5
Factoruy Default........................2-77
FM ...........................................2-33
Frequency Deviation ..................2-35
FSK .......................................... 2-36
General Care and Cleaning ...........6-3
General Inspection ......................1-2
General Specifications..................5-7
Handle Adjustment ......................1-3
Mod.........................2-36, 2-38, 2-46
PM ........................................... 2-38
Pulse Width............................... 2-13
PWM ........................................2-40
Set a Waveform ..........................1-8
Set the Gated Burst ...................2-48
Set the N-Cycle Burst................. 2-46
Specifications ..............................5-2
Square...................................... 2-16
Store/Recall .............2-50, 2-51, 2-60
Test..........................................2-79
The DG2000 User Interface ......... 1-7
The Front/Rear Panel .................. 1-4
The interconnection of DG2000 and
DS1000.................................... 2-52
The Menu/Graph Mode................ 2-2
To Generate Burst..................... 2-45
To Generate Sweep .................. 2-42
To Generate the Modulated Waveform
............................................... 2-30
To Set Arbitrary Signals............. 2-17
To Set Modulate/ Sweep/Burst... 1-11
To Set Noise Signals ................. 2-16
To Set Output Parameter........... 2-63
To Set Pulse Signals.................. 2-12
To Set Ramp Signals ................. 2-10
To Set Sine Signals ..................... 2-3
To Set Square Signals ................. 2-7
To Set the DC Output................ 2-60
To Set the Sync Output ............. 2-61
To Set the System .................... 2-72
To Set the Utility Function ......... 2-58
To Set Trigger/Output ............... 1-13
To Store and Recall................... 2-49
To Use Digital Input .................. 1-14
To Use Store/Utility/Help Function1-15
Troubleshooting........................ 4-17
Use the Built-in Help System...... 2-81
Warranty.................................... 6-2

Rigol DG2000 Series Specifications

General

Brand	Rigol
Model	DG2000 Series
Category	Portable Generator
Language	English