EasyManuals Logo

Rigol DG2000 Series User Manual

Rigol DG2000 Series
161 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #137 background imageLoading...
Page #137 background image
RIGOL
© 2006 RIGOL Technologies, Inc
User’s Guide for DG2000 Series
4-7
automatically.
Frequency is set maximum for ramp.
The maximum frequency for Ramp is 400kHz. When a waveform of higher frequency
is changed to the Ramp waveform, the system will automatically adjust the frequency
to 400kHz.
Frequency is set maximum for Burst.
For an internal burst, the minimum frequency is 2mHz, and the maximum is 8MHz.
The generator will adjust the frequency to be compatible with the currently specified
one automatically.
Frequency is set minimum for Burst.
For an internal burst, the minimum frequency is 2mHz, and the maximum is 8MHz.
The generator will adjust the frequency to be compatible with the currently specified
one automatically.
Frequency is set minimum for FM.
When the FM is activated, the minimum carrier frequency output is 1μHz. The
generator will adjust the frequency to be compatible with the currently specified one
automatically.
Sorry, unable to modulate Noise.
Noise, Pulse and DC can not be modulated using AM, FM, PM or FSK methods.
Sorry, unable to modulate DC.
Noise, Pulse and DC can not be modulated using AM, FM, PM or FSK methods.
Sorry, unable to sweep Pulses.
Pulse, Noise and DC can not be used to generate sweep signals.
Sorry, unable to sweep Noise.
Pulse, Noise and DC can not be used to generate sweep signals.
Sorry, unable to sweep DC.
Pulse, Noise and DC can not be used to generate sweep signals.
Modulation has been turned off to allow Pulse.
Pulse, noise and DC are not allowed to generate modulated waveform. So the
modulation has to be turned off to allow Pulse.
Modulation has been turned off to allow Noise.
Pulse, noise and DC are not allowed to generate modulated waveform. So the
modulation has to be turned off to allow Noise
Modulation has been turned off to allow DC.
Pulse, noise and DC are not allowed to generate modulated waveform. So the
modulation has to be turned off to allow DC
Sweep has been turned off to allow Pulse.
Pulse, noise and DC are not allowed to generate Sweep waveform. So the modulation

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Rigol DG2000 Series and is the answer not in the manual?

Rigol DG2000 Series Specifications

General IconGeneral
BrandRigol
ModelDG2000 Series
CategoryPortable Generator
LanguageEnglish

Related product manuals