Rigol DG2000 Series User Manual

RIGOL
© 2006 RIGOL Technologies, Inc
User’s Guide for DG2000 Series
4-16
adjust the Delay to 40s automatically.
Delay lower limit = 0.0000s
The Delay lower limit is 0.0000s. If the specified Delay is less than 0.0000s, the
system will adjust the Delay to 0.0000s automatically
Load Impedance upper limit =10kΩ
The Load Impedance upper limit is 10kΩ. If the specified Load Impedance is greater
than 10kΩ, the system will adjust the Load Impedance to 10kΩ automatically.
Load Impedance lower limit = 1Ω
The Load Impedance lower limit is 1Ω. If the specified Load Impedance is less than 1Ω,
the system will adjust the Load Impedance to 1Ω automatically.
Start Phase upper limit = 360.0 Degree
The Start Phase upper limit is 360.0
o
. If the specified Start Phase is greater than
360.0
o
, the system will adjust the Start Phase to 360.0
o
automatically.
Start Phase lower limit = -360.0 Degree.
The Start Phase lower limit is -360.0
o
. If the specified Start Phase is less than -360.0
o
,
the system will adjust the Start Phase to -360.0
o
automatically.
(**denotes the parameter, the content of which will vary according to the
setting.)

Rigol DG2000 Series Specifications

General

Brand	Rigol
Model	DG2000 Series
Category	Portable Generator
Language	English