RIGOL
© 2006 RIGOL Technologies, Inc
User’s Guide for DG2000 Series
2-51
To Save Data
Users are allowed to store data document in any of the 4 Non-Volatile Memories. If the
position is already occupied, the new document will cover the old one. To save the
data, following the steps:
1． Set the file Type to store
Press Store/Recall Æ State Æ data , and choose “data” as the storage type.
2． Choose the location of the file.
There are four positions in the local ARB1, ARB2, ARB3 and ARB4, and you can
choose one of them by rotating the knob.
3． Name the file and Save it
Press Store button, enter the self-defined name. Press Store to finish.
To Next Page
Loading...
