Rigol DG2000 Series

RIGOL
© 2006 RIGOL Technologies, Inc
User’s Guide for DG2000 Series
2-60
To Set the DC Output
Press Utility Æ DC On/Off Æ DC On , enter the following interface.
Figure 2-76 The DC Setting Interface
DC Offset
Set the DC Voltage Level.
To Shift into the Arbitrary Waveform Output
(1) Press Utility Æ DC On/Off Æ DC Off , close the DC output and return the
output of the Arbitrary Waveform.
(2) Press any functional button, and the waveform output setting turns to the output
of arbitrary waveform. The DC option is turned off automatically.
In the Graph Mode, the waveform is shown in figure 2-77.
Figure 2-77 Waveform Parameter in the Graph Mode
Offset