Rigol DG2000 Series - Page 89

RIGOL
© 2006 RIGOL Technologies, Inc
User’s Guide for DG2000 Series
2-63
To Set Output Parameter
Press Utility Æ Output , enter the following menu.
Figure 2-78 The Operation Menu
Table 2-27 The Menu Explanations of Output Setting
Function
Menu
Settings Explanation
Load
High Z
Set the Load connected to the Output
Connector.
Set the Load connected to the Output
Connector as High Z.
Range
Allow the Instrument to choose the best
Amplifier/ Attenuator
Normal
Inverse
Waveform Normal Output
Waveform Inverse Output
Phase
Set the Phase Offset of the Output
Waveform