RIGOL Chapter 10 Utility Functions and System Settings
DG4000 User's Guide
Beeper
When the beeper in DG4000 is turned, the beeper sounds when users operate the
front panel or when an error occurs during remote control.
Press Utility System Beeper to select "On" or "Off" and the default is "On".
The current setting is stored in non-volatile memory and will not be influenced by
"Preset".
Screen Saver
Enable or disable screen saver mode.
Press Utility System ScrnSvr to select "On" or "Off" and the default is
"Off". The current setting is stored in non-volatile memory and will not be
influenced by "Preset".
System Information
Press Utility System System Info and you can view the information (such
as the model, serial number and version number) of the instrument in the system
information interface.
To Next Page
Loading...
