RIGOL Chapter 1 Quick Start
DG4000 User's Guide
To Connect to Power
DG4000 accepts AC power supply: 100 to 240V, 45Hz to 440Hz. Please use the
power cable provided in the accessories to connect the instrument to AC power (as
shown in Figure 1-7). At this point, the generator is powered on and the power
button at the lower-left corner of the front panel is in breathing state.
Figure 1-7 To Connect to Power
If the power fuse needs to be changed, please return the instrument back
to our factory and the
authorized operator will change it for you.
To Next Page
Loading...
