Rigol DG800 Series User Manual

Chapter 2 Front Panel Operations RIGOL
DG800 User's Guide 2-105
To Lock the Keyboard
You can lock any key or all the keys on the front panel by using the keyboard lock
command.
1. Keyboard Lock Command Introduction
:SYSTem:KLOCk <key>,{ON|OFF|0|1} /*Locks or unlocks the specified key.*/
:SYSTem:KLOCk? <key> /*Queries whether the specified key is locked.*/
Wherein, <key> is used to specify the key, and its range is as follows:
HOME|MENU|PRESET|STORE|UTILITY|HELP|
LOCK|TRIG|
/*Function keys*/
LEFT|RIGHT|KNOB|
/*Arrow keys and knob*/
OUTPUt1|OUTPUt2|
/*Output control keys*/
COUNTER|
/*Frequency counter key*/
ALL
/*All the keys and the knob
on the front panel*/
{ON|OFF|0|1} is used to lock or unlock the keys. ON|1 denotes locking the
specified key and OFF|0 denotes unlocking the specified key.
2. Lock the Specified Key by Sending the Command through Ultra Sigma
 Build the communication between the generator and the computer.
 Run Ultra Sigma and search for the instrument resource.
 Open SCPI Panel Control and send the command.
For the details, refer to "Remote Control".

Rigol DG800 Series Specifications

General

Brand	Rigol
Model	DG800 Series
Category	Laboratory Equipment
Language	English