Rigol DS1000 Series Programming Guide

RIGOL
© 2008 RIGOL Technologies, Inc.
Programming Guide for DS1000/DS1000CA Series
2-3
1. *IDN?
Command Format:
*IDN?
Explanation:
The query returns the company name, oscilloscope model number, sequence
number, and software revision number.
Returned Format:
RIGOL TECHNOLOGIES,<model>,<sequence_number>,<rev_number>
Example:
RIGOL TECHNOLOGIES, DS1102C, DS1102200000122, 03.03.05
2. :RUN
Command Format:
:RUN
Explanation:
The command initiates the oscilloscope to acquire waveform data according to its
current settings. Acquisition runs continuously until the oscilloscope receives a :STOP
command, or a single acquisition has occurred when the Trigger mode is set to
“Single”.
3. :STOP
Command Format:
:STOP
Explanation:
The command controls the oscilloscope to stop acquiring data. To restart the
acquisition, use the :RUN command.

Rigol DS1000 Series Specifications

General

Brand	Rigol
Model	DS1000 Series
Category	Test Equipment
Language	English