Rigol DS1000 Series Programming Guide

RIGOL
© 2008 RIGOL Technologies, Inc.
Programming Guide for DS1000/DS1000CA Series
2-16
Explanation:
This command is to toggle the vertical scale Coarse/Fine. Coarse step sequence is
1-2-5, Fine is to adjust gradually.
Example:
Suppose the current mode is coarse, send the commands as follows:
:KEY:PROMPT_V Toggle to fine
:KEY:V_SCALE_INC Adjust the vertical scale gradually
35. :KEY:PROMPT_H
Command Format:
:KEY:PROMPT_H
Explanation:
This command is to set the delayed scan on or off.
36. :KEY:FUNCtion
Command Format:
:KEY:FUNCtion
Explanation:
This command is to select the multi-function knob.
37. :KEY:+FUNCtion
Command Format:
:KEY:+FUNCtion
Explanation:
This command is to increase the offset of the multi-function knob. (Equivalent
turning the knob clockwise)

Rigol DS1000 Series Specifications

General

Brand	Rigol
Model	DS1000 Series
Category	Test Equipment
Language	English