Rigol DS1000 Series

To Next Page

To Previous Page

RIGOL

Programming Guide for DS1000/DS1000CA Series

2-17

38. :KEY:-FUNCtion

Command Format:

:KEY:-FUNCtion

Explanation:

This command is to decrease the offset of the multi-function knob. (Equivalent

turning the knob anti-clockwise)

39. :KEY:LA

Command Format:

:KEY:LA

Explanation:

This command is to set the LA function and the menu on or off.

40. :KEY:PROMPT_V_POS

Command Format:

:KEY:PROMPT_V_POS

Explanation:

This command is to re-set the vertical display of the waveform (analog channel) to

the zero point.

41. :KEY:PROMPT_H_POS

Command Format:

:KEY:PROMPT_H_POS

Explanation:

This command is to adjust the trigger offset (or the delayed scan offset) to the

horizontal zero point.

Rigol DS1000 Series - Page 25