Rigol DS1000 Series Programming Guide

RIGOL
© 2008 RIGOL Technologies, Inc.
Programming Guide for DS1000/DS1000CA Series
2-20
1. :MEASure:CLEar
Command Format:
:MEASure:CLEar
Explanation:
This command is to clear the current value.
2. :MEASure:VPP?
Command Format:
:MEASure:VPP?□[<source>]
Explanation:
This command is to measure the CH1 or the CH2 Peak-Peak value, and the defined
source is CHANnel1 or CHANnel2 respectively.
Returned Format:
Query returns 5.28e+00, unit is V.
3. :MEASure:VMAX?
Command Format:
:MEASure:VMAX?□[<source>]
Explanation:
This command is to measure the maximum value for the waveform.
Returned Format:
Query returns 2.64e+00, unit is V.
4. :MEASure:VMIN?
Command Format:
:MEASure:VMIN?□[<source>]
Explanation:

Rigol DS1000 Series Specifications

General

Brand	Rigol
Model	DS1000 Series
Category	Test Equipment
Language	English