Rigol DS1000 Series Programming Guide

RIGOL
© 2008 RIGOL Technologies, Inc.
Programming Guide for DS1000/DS1000CA Series
2-21
This command is to measure the minimum value for the waveform.
Returned Format:
Query returns -2.64e+00, unit is V.
5. :MEASure:VAMPlitude?
Command Format:
:MEASure:VAMPlitude?□[<source>]
Explanation:
This command is to measure the amplitude of the waveform.
Returned Format:
Query returns 5.28e+00, unit is V.
6. :MEASure:VTOP?
Command Format:
:MEASure:VTOP?□[<source>]
Explanation:
This command is to measure the top value of the waveform.
Returned Format:
Query returns 2.64e+00, unit is V.
7. :MEASure:VBASe?
Command Format:
:MEASure:VBASe?□[<source>]
Explanation:
This command is to measure the base value of the waveform.
Returned Format:
Query returns -2.64e+00, unit is V.

Rigol DS1000 Series Specifications

General

Brand	Rigol
Model	DS1000 Series
Category	Test Equipment
Language	English