Rigol DS1000 Series Programming Guide

RIGOL
© 2008 RIGOL Technologies, Inc.
Programming Guide for DS1000/DS1000CA Series
2-25
18. :MEASure:PDUTycycle?
Command Format:
:MEASure:PDUTycycle?□[<source>]
Explanation:
This command is to measure the positive duty cycle of the waveform.
Returned Format:
Query returns 5.00e-01.
19. :MEASure:NDUTycycle?
Command Format:
:MEASure:NDUTycycle?□[<source>]
Explanation:
This command is to measure the negative duty cycle of the waveform.
Returned Format:
Query returns 5.00e-01.
20. :MEASure: PDELay?
Command Format:
:MEASure:PDELay?□[<source>]
Explanation:
This command is to measure the delay between channel 1, channel 2 at the
positive edge.
Returned Format:
Query returns <-1.00e-04, unit is s.
21. :MEASure:NDELay?
Command Format:
:MEASure:NDELay?□[<source>]

Rigol DS1000 Series Specifications

General

Brand	Rigol
Model	DS1000 Series
Category	Test Equipment
Language	English